uPVC Pipe


uPVC Pipe


UPVC pipes are unplasticized pipes with standard wall thickness, outer diameter, colour, length and calculated standard pressure (DIN/ISO).
Company's main products are:
i. UPVC pressure pipes 20mm - 315mm(OD) with various pressure rating
ii. UPVC Drain Pipes 20mm - 315mm
iii. UPVC Cable Duct/Conduits Pipe
Other Pipes can be produced according to specification within short period.


Advantages:


1. Corrosion Resistance/Durability: It is highly resistant to internal & external corrosion when installed underground or above ground thus gives durability to the product.
2. Strength: It can withstand external load up to 75,000kg/m2 if properly designed & installed.
3. Water quality: It delivers clean & pure water as it receives. It’s smooth, non-biogradable inner wall makes it resistant to biofilm build-up, a potential source to water contamination & disease, including E.Coli.
4. Smooth Bore: It’s smooth bore allows high flow rate there by reduced failures & blockages in case of waste water pipelines. Energy consumption for pumping is also low due to less friction of the water with the wall of the pipe.
5. Installation: Cost of installation & time consume is significantly low.
6. Long life: A quality PVC pipe’s longevity & performance is proved to be in excess of 50 years.
7. Tree Root Intrusion: PVC pipe is more resistance to tree intrusion.

Application:


- Potable water distribution systems
- Irrigation and watering systems
- Industrial process pipelines and rainwater from the building.
- Pressure sewer
- Effluent pipelines

THICKNESS CHART OF PIPE AS PER ISO 1452


Working Pressure Thickness (mm)

Outside Diameter(mm) 6 Bar 8 Bar 10 Bar 12.5 Bar 16 Bar
20 - - - - 1.5
25 - - - 1.5 1.9
32 - 1.5 1.6 1.9 2.4
40 1.5 1.6 1.9 2.4 3.0
50 1.6 2.0 2.4 3.0 3.7
63 2.0 2.5 3.0 3.8 4.7
75 2.3 2.9 3.6 4.5 5.6
90 2.8 3.5 4.3 5.4 6.7
110 2.7 3.4 4.2 5.3 6.6
125 3.1 3.9 4.8 6.0 7.4
140 3.5 4.3 5.4 6.7 8.3
160 4.0 4.9 6.2 7.7 9.5
180 4.4 5.5 6.9 8.6 10.7
200 4.9 6.2 7.7 9.6 11.9
225 5.5 6.9 8.6 10.8 13.4
250 6.2 7.7 9.6 11.9 14.8
280 6.9 8.6 10.7 13.4 16.6
315 7.7 9.7 12.1 15.0 18.7

THICKNESS CHART OF PIPE AS PER DIN 8062/NIS 375:2010


Working Pressure Thickness (mm)

Outside Diameter(mm) 4 Bar 6 Bar 10 Bar 16 Bar
20 - - - 1.5
25 - - 1.5 1.9
32 - - 1.8 2.4
40 - 1.8 1.9 3.0
50 - 1.8 2.4 3.7
63 - 1.9 3.0 4.7
75 1.8 2.2 3.6 5.6
90 1.8 2.7 4.3 6.7
110 2.2 3.2 5.3 8.2
125 2.5 3.7 6.0 9.3
140 2.8 4.1 6.7 10.4
160 3.2 4.7 7.7 11.9
180 3.6 5.3 8.6 13.4
200 4.0 5.9 9.6 14.9
225 4.5 6.6 10.8 16.7
250 4.9 7.3 11.9 18.6
280 5.5 8.2 13.4 20.8
315 6.2 9.2 15.0 23.4